TechT Tippmann Cyclone Feed Vortex Mod

The Techt Tippmann Cyclone Feed Vortex Mod is a great upgrade for any Tippmann paintball gun with a cyclone feed. The TechT Tippmann Cyclone Feed Vortex Mod will allow your cyclone feed hopper to feed much faster than stock.

The Vortex Mod was the first hard-coated and teflon coated aluminum internals that replace the stock plastic internals of the Tippmann Cyclone Feed to be released in the paintball industry.

The popularity of electronic controls in Tippmann A5, X7, and 98's that allow for rates of fire of up to 30 BPS, has warranted the need for higher performing internals for the cyclone feed that will allow the loader to keep up with the marker.

Our testing has shown that the Vortex Mod will allow the Cyclone feed to work at lower pressures, feed faster, and last up to 1000 times longer than the stock plastic cyclone feed internals.

While stock cyclone internals need to be replaced on a regular basis, the Vortex Mod is a permanent solution that makes the cyclone into the fastest, and most reliable loader available.

The Vortex Mod will feed upwards to 30+ balls per second and continue to load down to pressures as low as 150psi.